Itaconic acid monomethyl ester - Names and Identifiers
Itaconic acid monomethyl ester - Physico-chemical Properties
Molecular Formula | C6H8O4
|
Molar Mass | 144.13 |
Density | 1.195±0.06 g/cm3(Predicted) |
Melting Point | 72°C |
Boling Point | 149 °C / 10mmHg |
pKa | 3.59±0.10(Predicted) |
Storage Condition | under inert gas (nitrogen or Argon) at 2-8°C |
MDL | MFCD00021713 |
Itaconic acid monomethyl ester - Risk and Safety
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
Itaconic acid monomethyl ester - Upstream Downstream Industry
Itaconic acid monomethyl ester - Introduction
Itaconic acid monometyl ester, the chemical formula of C, H, O, is an organic compound. The following is an introduction to the nature, use, formulation and safety information of Itaconic acid monometyl ester:
Nature:
Iaconic acid monometyl ester is a colorless liquid with an odor similar to water at room temperature. It has a lower boiling point and higher solubility, soluble in water and some organic solvents.
Use:
Itaconic acid monometyl ester has a wide range of uses in the chemical industry. It is often used as a basic raw material for dyes, coatings and adhesives. In addition, it can also be used to prepare polymers, resins and synthetic rubbers, with a wide range of applications.
Method:
The preparation of Itaconic acid monomethyl ester is usually achieved by esterification of Itaconic acid with methanol. The reaction usually requires the presence of a catalyst, such as sulfuric acid.
Safety Information:
Itaconic acid monomer ester is a chemical substance, should pay attention to its safe use. Appropriate protective measures, including protective gloves, goggles and protective clothing, are required when handling the compound. Breathing of vapors or solutions of the substance should be avoided and kept well ventilated. If the skin or eyes are touched, rinse immediately with plenty of water and seek medical help. In addition, the Itaconic acid monomer ester should be stored in a cool, dry and well-ventilated place, avoiding fire and oxidizing agents.
Last Update:2024-04-10 22:29:15